New: Automated Design is live

MCP Prompt Library

MCP Prompts for Rod Lift Engineers

Copy a prompt into Claude, ChatGPT, Gemini or any MCP-compatible tool. Each one lists the PetroBench tools it calls and the scopes it needs.

Browse the Prompts Request Demo

PERM-4821 is having its rods pulled for offset frac protection. Based on last month's average production, use RodSim to see if we can downsize the pump to 1.75 in or 1.5 in.

Called PetroBench tools
  • get-well-production
  • execute-simulation
  • compare-simulations

Both sizes make the 200 bfpd target. The 1.75 in pump drops gearbox load from 96% to 86% at 7.1 SPM. The 1.5 in pump needs 9.2 SPM and gains little, so 1.75 in fits best.

PERM-4821, pump size at 200 bfpd
2.0 in1.75 in1.5 in
Stroke rate 5.6 SPM 7.1 SPM 9.2 SPM
Fluid rate 200 bfpd 200 bfpd 200 bfpd
Gearbox load 96% 86% 84%
Max rod stress 88% 81% 78%
System efficiency 33% 31% 27%

Example result

Read a Well

  • Show me the rod string, pump and pumping unit on [well], with the taper depths and the unit rating.

    Calls
    find-wells, get-well-equipment
    Needs
    wells:read

  • Which wells in the Permian region have a pump deeper than 9,000 ft? List each well with its pump depth.

    Calls
    find-wells, get-well
    Needs
    wells:read

  • Which wells are missing a directional survey or equipment? Group them by what is missing.

    Calls
    detect-data-gaps
    Needs
    wells:read

Diagnose

  • [Well] shuts down on gearbox overload alarms. Check the design, the production trend and the last fluid shot. What is the root cause?

    Calls
    get-well, validate-well-data, get-well-production
    Needs
    wells:read

  • Summarize the last simulation on [well]. Flag gearbox, structure and rod loading above 90%, and say which limit to fix first.

    Calls
    query-simulations, get-simulation-results
    Needs
    simulations:read

  • Is [well] ready to simulate? List anything missing or out of range, and what I need to enter to fix it.

    Calls
    validate-well-data
    Needs
    wells:read

Change a Design

  • [Well] is having its rods pulled for offset frac protection. Based on last month's average production, use RodSim to see if we can downsize the pump to 1.75 in or 1.5 in.

    Calls
    get-well-production, execute-simulation, compare-simulations
    Needs
    wells:read, simulations:read, simulations:run

  • Run [well] at 4.0 SPM as a draft. Compare stroke rate, gearbox load, rod stress and oil rate with the current design.

    Calls
    execute-simulation, compare-simulations
    Needs
    simulations:read, simulations:run

  • Preview 2 7/8 in tubing on [well], run a draft, and show me what changes before you save anything.

    Calls
    set-well-tubing, execute-simulation
    Needs
    wells:write, simulations:run

Run RodSim Dynamics

  • Run RodSim Dynamics on [well]. Which operating conditions stay inside the limits, and which limit fails first?

    Calls
    execute-simulation, poll-job, get-simulation-results
    Needs
    simulations:read, simulations:run

Rank Your Wells

  • Rank my wells by gearbox load, show the top ten, and flag any above 90%.

    Calls
    fleet-wells
    Needs
    wells:read

  • Which wells have gone longest without a simulation? Start with the oldest.

    Calls
    fleet-wells
    Needs
    wells:read

  • Which wells have gone longest without a fluid shot?

    Calls
    fleet-wells
    Needs
    wells:read

Run This on Your Own Wells

Your PetroBench account team turns on MCP access for your organization. Then ask your first question in plain words.

Request Demo Connect Your AI Tool
Works in