Use Your Rod-Lift Wells in Warp

Paste the PetroBench config into Warp. Warp can then find wells, read equipment, and run RodSim simulations with the permissions you already have.

Connect Warp Request Demo

	Base	Case B
Stroke rate	5.0 SPM	4.0 SPM
Gearbox load	94%	78%
Pump fillage	71%	88%
Max rod stress	82%	76%
Oil rate	157 bopd	155 bopd

	1.0 in	7/8 in
Top taper stress	71%	86%
Rod string weight	9,850 lb	8,420 lb
Gearbox load	83%	79%
Fatigue check	Pass	Marginal

	4.0 SPM	5.0 SPM	6.0 SPM
Oil rate	118 bopd	131 bopd	136 bopd
Pump fillage	96%	89%	74%
Gearbox load	71%	86%	98%

Connect Warp in Two Steps

Warp stores your sign-in on each device. Cloud agents need a separate managed setup.

MCP access is off by default. Your PetroBench account team turns it on for your organization.

1
Add the server

Open Settings > Agents > MCP servers, click Add, and paste the config.
MCP config
```
{
  "PetroBench": {
    "url": "https://app.petrobench.com/mcp"
  }
}
```
2
Sign in to PetroBench

Warp opens your browser. Approve the permissions you want.

Try These on Your Wells

Start by asking Warp to list your wells. If it returns wells from your organization, the connection works. Then pick a job below.

See All Prompts

The same prompts work in

Warp and PetroBench Find the Cause

PERM-4821 shuts down on gearbox overload alarms. What is the root cause?

get-well
validate-well-data
get-well-production

Peak torque is at 94% of the gearbox rating at 5.0 SPM. The last fluid shot puts pump fillage at 71%, and the card shows fluid pound on the downstroke.

PERM-4821, latest dyno card

Load (klb) vs position (in)

Peak load: 29.2 klb
Min load: 8.5 klb
Fillage: 71%
Net stroke: 113 in

Example result

Warp and PetroBench Size the Pump

PERM-4821 is having its rods pulled for offset frac protection. Based on last month's average production, use RodSim to see if we can downsize the pump to 1.75 in or 1.5 in.

get-well-production
execute-simulation
compare-simulations

Both sizes make the 200 bfpd target. The 1.75 in pump drops gearbox load from 96% to 86% at 7.1 SPM. The 1.5 in pump needs 9.2 SPM and gains little, so 1.75 in fits best.

PERM-4821, pump size at 200 bfpd

	2.0 in	1.75 in	1.5 in
Stroke rate	5.6 SPM	7.1 SPM	9.2 SPM
Fluid rate	200 bfpd	200 bfpd	200 bfpd
Gearbox load	96%	86%	84%
Max rod stress	88%	81%	78%
System efficiency	33%	31%	27%

Example result

Warp and PetroBench Sweep the Conditions

Run RodSim Dynamics on PERM-3304. Which operating conditions stay inside the limits?

execute-simulation
poll-job
get-simulation-results

1,038 of 1,221 cases stay inside the limits. Gearbox load causes most failures, above 5.5 SPM at low pump intake pressure.

PERM-3304, 1,221 Dynamics cases

	Cases
Inside all limits	1,038
Over gearbox limit	111
Over rod loading limit	52
Under rod min stress	20

Example result

Warp and PetroBench Rank the Wells

Which of my wells run closest to their gearbox limit?

fleet-wells

PERM-4821 and PERM-1190 run closest to their limits. PERM-3304 is third at 86%.

Gearbox load, top 3

Example result

You Decide What Warp Can Do

You pick the permissions when you connect. Warp only sees tools that match them and your role.

Every call is recorded with your user and token. Disconnect at any time under Settings > Connected Apps.

Authorize Warp

Permissions for Warp

Read wells and equipment wells:read
Read simulations and results simulations:read
Run simulations simulations:run
Change wells and equipment wells:write

Authorize Cancel

Connecting Warp

Short answers for engineers and IT.

Do I need an API token to connect Warp?

No. Warp signs in with OAuth. You approve the connection on the PetroBench consent screen in your browser.

Is MCP access on for every organization?

No. MCP access is off by default. Your PetroBench account team turns it on when your organization asks.

What can Warp see and change?

Only what your role and the approved scopes allow, inside your organization. Without write scopes, Warp never sees write tools.

Can Warp change a well on its own?

Only with write scopes that you tick when you connect. AI clients can make mistakes, so review any change before you confirm it, and keep write access to the users who need it.

How do I disconnect Warp?

Open Settings > Connected Apps in PetroBench and disconnect it. To change scopes, disconnect and connect again.

Connect Another AI Tool

Every tool uses the same server URL and the same PetroBench sign-in.

https://app.petrobench.com/mcp

Using another tool? Paste this URL into any MCP client that supports remote servers and OAuth.

Assistants

Coding agents

Use Warp on Your Own Wells

Your PetroBench account team turns on MCP access for your organization. Then ask your first question in plain words.

Request Demo Read the MCP Docs

Works in

Use Your Rod-Lift Wells in Warp

Connect Warp in Two Steps

Add the server

Sign in to PetroBench

Try These on Your Wells

You Decide What Warp Can Do

Connecting Warp

Connect Another AI Tool

Use Warp on Your Own Wells